When was the last time the roof of your building was inspected? If it’s been awhile, the roof could have problems lurking that require immediate attention. Some roof problems cause obvious signs such as leaks, while others produce subtle signs which are only detectable on the surface. In either case, leaving the problems unaddressed can cost you a small fortune once you finally repair them. If the roof on your own building has the problems listed below, a company that specializes in commercial roofing should repair them quickly:
Buckled Panels
Roof panels buckle due to weather damage and poor installation. Regardless of the cause, the buckling allows wind to blow underneath the panels, making them loose. Because the problem worsens, the panels start to fall off, often coming off in large sections when a storm hits. Buckled panels are perhaps one of the most commonly fixed problems by companies that perform roof repair.
Expended Screw Holes
Expanded screw holes are another problem for panel roofs. Over time, wind and fluctuating temperatures cause the screw holes in panels to widen around the screws that hold the panels in place. This creates a space where water can leak underneath the panels and soak the roof deck. After the deck becomes saturated, the thing is costly to fix.
Blistering
Improper heating procedures and dry lapping cause hot bituminous roof systems to blister. Although small blisters seldom pose an issue, large ones can rupture and invite water to seep beneath the bitumen. Roofing Company Baton Rouge After the blisters form, warm weather typically makes them worse. As a result of humid subtropical climate in some regions of the united states, commercial roofing frequently experiences blistering.
Ponding Water
Blocked drains and improper sloping could cause water to gather in small ponds on a roof. Repairing a blocked drain is simple, but fixing a sloping problem is more technical. Often, installing a taper insulation system to establish a new slope is the better solution. During the rainy season, resolving ponding water is probably the most common types of roof repair.
Loose Flashing
Flashing prevents water from seeping in the crevice where in fact the roof abuts to protrusions such as chimneys and vents. Over time, most flashing should be resealed. If it’s not, leaks could cause serious damage the deck and building interior. Most flashing problems are corrected during the course of scheduled maintenance.
Missing Mortar
Chimneys and high elements of brick walls that have sections of missing mortar could cause leaks. These leaks tend to be mistaken for leaks in the roof membrane, but an intensive inspection by a company that focuses on commercial roofing will reveal the real problem. Most parts of missing mortar can be repaired with basic tuck pointing procedures.
Conclusion
The problems above are a few of the most common known reasons for roof repair. When they are corrected early, most problems are cheap to fix, however, not addressing them until they cause serious problems may necessitate roof replacement. Having a scheduled maintenance agreement with a roofing company is a good solution to ensure problems are detected early.